This is a loft that was completed in March 2005. It is a twin size loft bed with the bed on the top only. The lower section is used as a play area. The two end panels were built in a four post design.

The arch on the end panel had a custom bent top molding. This molding was made by re-sawing boards down to about an 1/8” thick. 6 pieces were glued and clamped to a form. Once the glue dried it held it’s shaped and the could be trimmed and shaped.

 

Price    $699

 

Dimensions 81" x 42" x 78"

(Custom sizes available)